Keywords
Precision agriculture
automatization
under cover crops
design’s metodology
tomato crop Agricultura de precisión
automatización
cultivo bajo cubierta
metodología de diseño
cultivo de tomate
automatization
under cover crops
design’s metodology
tomato crop Agricultura de precisión
automatización
cultivo bajo cubierta
metodología de diseño
cultivo de tomate
How to Cite
Coronado H., H., Peña A., J. P., Muñoz V., R. E., Ortega M., E., & Flórez D., J. (2014). Bibliographic revision about development and approval of an automatized greenhouse system. Revista Agropecuaria Y Agroindustrial La Angostura, 1(1), 49–57. https://doi.org/10.23850/raaa.v1i1.150
Abstract
Abstract: In western Huila (Colombia) the agricultural sector in greenhouse crops shows a low use of technology. There is a need to develop jobs that allow farmers improve crop conditions in greenhouses, implementing new low–cost technologies that increase crop performance. The objective of this bibliographic revision is to establish the state of the art, in order to structure the project “Validation of an automatized greenhouse system to improve the tomato crop’s productivity in La Plata, Huila”. Scientific articles from specialized databases and technical documents were reviewed from state entities devoted to agricultural research were reviewed with the aim of learning about national and international research about the design, methodology and system development, control models and automatization applied to precision agriculture, production of tomato’s under cover crops in controlled environments and agroecologic conditions included their respective cost and prices in the colombian market. The results of the review show in detail the metodology, development platforms, electronic devices, variety of selected tomatoes, type of greenhouse and watering systems that will be used for the development of the project previously mentioned.References
Audberto Reyes–Rosas; Raúl Rodríguez–García; Alejandro Zermeño–González; Diana Jasso–Cantú, M. C. H. B. (2012). “Evaluación de un modelo para estimar la temperatura y humedad relativa en el interior de invernadero con ventilación natural”. Rev. Chapingo Ser.Hortic vol.18 no.1 Versión Impresa ISSN 1027-152X, 1(1), 125–140
El, T. P.; & Rodríguez, V. P. (2013). Tecnología para el cultivo de tomate bajo condiciones protegidas.
Espinosa, O. L.; Nolasco, A. Q.; Mengelberg, J. R. B.; & Palacios, E. (2011). “Prototipo para automatizar un sistema de riego multicultivo* prototype for automating a multicropping irrigation system”, 2, 659–672.
J. I. Montero1; P. Muñoz; M. C. Sánchez-Guerrero; E. M.; & Lorenzo, D. P. (2013). “Shading screens for the improvement of the night-time climate of unheated greenhouses”. Spanish Journal of Agricultural Research 2013. 11(1), 32-46 ISSN: 1695-971-X eISSN: 2171-9292, 11(1), 32–46
Mill, L.; Noreña, J. J.; A, M. G.; Zapata, M. A.; & Técnico, B. (2006). El cultivo de tomate bajo invernadero (pp. 1–48).
Nieto, E. C. (2006). “Manufactura y automatización Manufacturing and automation”. Ing. Investig. vol.26 no.3 Bogotá Sep./Dec. 2006 ISSN 0120-5609, 26(3), 120–128.
Orlando, F.; Palacios, R.; & Cotrino, E. (2010). “Identificación de un modelo del clima en un invernadero mediante métodos por subespacios *Identifying a greenhouse climate model by using subspace methods”. Ingeniería E Investigación, ISSN 01295608, Vol. 30, N . 2, 2010, Pags. 157-167, 30(2), 157–167.
Paula, A.; Olea, J.; Alexander, P.; Rivera, S.; & Garavito, A. (2007). “Sistema de información orientado a procesos de negocio y flujos de trabajo en la Universidad Nacional de Colombia. Perspectivas y caso de estudio A business management- and workflow-orientated information system in the Universidad Nacional de Colombia”. Revista Ingeniería e investigación. Vol. 27 no.3, diciembre de 2007 (193-202). ISSN 0129-5608, 27(3), 193–202.
Pérez., J. L. M.; et al (s. f.). Manual de Buenas Prácticas Agrícolas en el cultivo de tomae (Lycopersicum esculentum Mill).
Srbinovska, M.; Gavrovski, C.; Dimcev, V.; Krkoleva, A.; & Borozan, V. (2014). “Environmental parameters monitoring in precision agriculture using wireless sensor networks”. Journal of Cleaner Production 2014 1-14. doi:10.1016/j.jclepro.2014.04.036
Tomiyama, T.; Gu, P.; Jin, Y.; Lutters, D.; Kind, C.; & Kimura, F. (2009). “Design methodologies: Industrial and educational applications”. CIRP Annals - Manufacturing Technology, 58(2), 543–565. doi:10.1016/j. cirp.2009.09.003
Villagrán, E. A.; Gil, R.; Acuña, J. F.; & Bojacá, C. R. (2012). “Optimization of ventilation and its effect on the microclimate of a colombian multispan greenhouse Optimización de la ventilación y su efecto en el microclima de un invernadero multitúnel colombiano”. Agron. Colomb. vol.30 no.2 Bogotá May/Aug. 2012 ISSN 0120-9965, 30(2), 282–288
Wang, Y.; Yu, Y.; Xie, C.; Zhang, X.; & Jiang, W. (2013). “A proposed approach to mechatronics design education: Integrating design methodology, simulation with projects”. Mechatronics, 23(8), 942–948. doi:10.1016/j.mechatronics.2012.10.002
Zambrano, A. (2009). “Cultivo de tomate en invernadero”. 978-958-740-004-5. Retrieved from http:// www.corpoica.org.co/sitioweb/archivos/publicaciones/tomateeninvernadero.pdf
Zheng, C.; Bricogne, M.; Le Duigou, J.; & Eynard, B. (2014). “Survey on mechatronic engineering: A focus on design methods and product models”. Advanced Engineering Informatics. doi:10.1016/j. aei.2014.05.003
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright (c) 2015 Revista Agropecuaria y Agroindustrial La Angostura
Downloads
Download data is not yet available.