Keywords
Fatty pork,
lean pork,
pork trimmings,
semi-fatty pork,
technological properties. Cerdo graso,
cerdo magro,
cerdo semigraso,
propiedades tecnológicas,
recortes de cerdo.
lean pork,
pork trimmings,
semi-fatty pork,
technological properties. Cerdo graso,
cerdo magro,
cerdo semigraso,
propiedades tecnológicas,
recortes de cerdo.
How to Cite
Franko, E., Voitsekhivska, L., Nedorizaniuk, L., Verbytskyi, S., & Patsera, N. (2024). Technological properties of pork in sausage production: comparison of trimmings obtained from animals of meat, meat-lard and lard breeds . Revista Colombiana De Investigaciones Agroindustriales, 11(2), 148–160. https://doi.org/10.23850/24220582.6492
Abstract
Sausages are the most popular and widely manufactured meat products in Ukraine and pork is a typical raw material used for the purpose. However, there is a deficiency of pork and meat processors have to operate with all the raw meats available and often originated from the animals of different types and breeds. These are characterized by different technological properties which prevents from manufacturing sausages of the constant quality. So it is necessary to provide with the relevant information on the content and properties of different types of pork used in practice. The goal was to study physical, chemical, functional and technological properties of lean, semi-fatty and fatty trimmed pork obtained by boning and trimming half-carcasses of meat, meat-and-lard and lard breed pigs. It is determined in the course of quintuplicate experiments that trimmed meat obtained from meat breed pigs contains 13 % by weight less fatty tissue than trimmed meat from meat-and-lard pigs and 46 % by weight less than trimmed meat from lard breed pigs. It is determined that the fat tissue content in lean pork is within the range from 6.44 % to 15.08 % by weight, in semi-fatty pork – from 27.67 % to 50.96 % by weight, in fatty pork – from 58.32 % to 68.91 % by weight. The values of the criteria for assessing the functional and technological properties are determined: water to protein, fat to protein, water to fat ratios, water-binding capacity in different grades of minced trimmed meat. It is established that the optimum values of water-binding capacity with simultaneous growth of fat and water absorption are characteristic of semi-fatty pork with a fat content of 27.67 % – 34.73 % by weight, which corresponds to a fat-to-protein ratio of 2.0 – 2.5. The research fulfilled makes possible to determine the main criteria for assessing the functional and technological properties of trimmed meat, and their influence on the ability of trimmed meat of different grades to bind and retain water and fat, and to create stable meat emulsions. It facilitates the use different types and breeds of pork to guarantee the quality characteristics of the sausages being manufactured.
References
Bal-Prylypko, L., Yancheva, M., Paska, M., Ryabovol, M., Nikolaenko, M., Israelian, V., ... & Nazarenko, M. (2022). The study of the intensification of technological parameters of the sausage production process. Slovak Journal of Food Sciences, 16. https://doi.org/10.5219/1712
Basonov, O. A., & Sudakova, A. V. (2022). Chemical composition and nutritional value of different genotypes of sturgeon in industrial production. Vestnik of Ulyanovsk State Agricultural Academy, 2 (58), 178-184. https://doi.org/10.18286/1816-4501-2022-2-178-184
Bekhit, A. E. D. A. (Ed.). (2017). Advances in meat processing technology. CRC Press.
Bondi, A., & Rechcigl, M. (2018). Nutrition and animal productivity. In Handbook of agricultural productivity (pp. 195-212). CRC Press. https://doi.org/10.1201/9781351072861
de Araújo, P. D., Araújo, W. M. C., Patarata, L., & Fraqueza, M. J. (2022). Understanding the main factors that influence consumer quality perception and attitude towards meat and processed meat products. Meat Science, 193, 108952. https://doi.org/10.1016/j.meatsci.2022.108952
Chen, C., Zhu, J., Ren, H., Deng, Y., Zhang, X., Liu, Y., ... & Peng, Y. (2021). Growth performance, carcass characteristics, meat quality and chemical composition of the shaziling pig and its crossbreeds. Livestock Science, 244, 104342. https://doi.org/10.1016/j.livsci.2020.104342
Gagaoua, M., Duffy, G., Alvarez, C., Burgess, C. M., Hamill, R., Crofton, E., Botinestean, C., Ferragina, A., Cafferky, J., Mullen, A. M., & Troy, D. (2022). Current research and emerging tools to improve fresh red meat quality. Irish Journal of Agricultural and Food Research, 61(1), 145-167. https://doi.org/10.15212/ijafr-2020-0141
Grau, R., & Hamm, R. (1957). Über das Wasserbindungsvermögen des Säugetiermuskels. II. Mitteilung. Über die Bestimmung der Wasserbindung des Muskels. Zeitschrift für Lebensmittel-Untersuchung und Forschung, 105, 446-460. https://doi.org/10.1007/BF01126901
Kara, R., Acaröz, U., Gürler, Z., & Soylu, A. (2021). Bazı et ürünlerinin fizikokimyasal özelliklerinin araştırılması. Akademik Et ve Süt Kurumu Dergisi, (2), 5-12. https://dergipark.org.tr/en/download/article-file/1743733
Keim, H., & Franke, R. (2007). Fachwissen Fleischtechnologie (Vol. 2). Deutscher Fachverlag, 481 р.
Kipper, M. M., Marcoux, M., Andretta, I., & Pomar, C. (2019). Assessing the accuracy of measurements obtained by dual-energy X-ray absorptiometry on pig carcasses and primal cuts. Meat Science, 148, 79-87. https://doi.org/10.1016/j.meatsci.2018.10.005
Kopylova, K., & Verbytskyi, S. (2015). Effect of ante-mortem factors and slaughter methods on commercial quality of pork. Animal Breeding and Genetics, 49, 100-106.
http://digest.iabg.org.ua/images/digest/49/Animal_breeding_and_genetics_49.pdf
Kryzhova, Y., Slobodenyuk, N., & Moskalenko, I. (2023). Application of modern technologies to improve the quality of sausage products. Scientific Journal'Animal Science & Food Technologies', 14(1). https://doi.org/10.31548/animal.1.2023.49
Latoch, A., Wójciak, K. M., Popek, S., Rohn, S., & Halagarda, M. (2021). Technological properties and selected safety aspects of different cuts of organic and conventional pork. International Journal of Food Science & Technology, 56(12), 6192-6203. https://doi.org/10.1111/ijfs.15217
Lebret, B., & Čandek-Potokar, M. (2022). Pork quality attributes from farm to fork. Part I. Carcass and fresh meat. Animal, 16, 100402. https://doi.org/10.1016/j.animal.2021.100402
Masoumi, M., Marcoux, M., Maignel, L., & Pomar, C. (2021). Weight prediction of pork cuts and tissue composition using spectral graph wavelet. Journal of Food Engineering, 299, 110501. https://doi.org/10.1016/j.jfoodeng.2021.110501
Matarneh, S. K., Silva, S. L., & Gerrard, D. E. (2021). New insights in muscle biology that alter meat quality. Annual review of animal biosciences, 9(1), 355-377. https://doi.org/10.1146/annurev-animal-021419-083902
Meat industry. Manufacturing of meat products. Terms and definitions of concepts. National Standard of Ukraine DSTU 4424:2005. (2005). – [In force from 2006–01–01]. – Kyiv: State Committee for Technical Regulation and Consumer Policy, 28 p.
Meat and meat products. Determination of total fat content. DSTU ISO 1443:2005. (2007a). – [In force from 2006–04–01]. – Kyiv: State Committee for Technical Regulation and Consumer Policy, 8 p.
Meat and meat products. Determination of water content (Reference method). DSTU ISO 1442:2005. (2007b). – [In force from 2006–04–01]. – Kyiv: State Committee for Technical Regulation and Consumer Policy, 8 p.
Meat and meat products. Determination of nitrogen content (Reference method). DSTU ISO 937:2005. (2007c). – [In force from 2006–04–01]. – Kyiv: State Committee for Technical Regulation and Consumer Policy, 10 p.
Munekata, P. E., Pateiro, M., Franco, D., & Lorenzo, J. M. (Eds.). (2021). Pork: Meat Quality and Processed Meat Products. CRC Press.
Nitsenko, V. S. (2019). Problems and directions of optimization of pork production costs. Bulletin of the Kharkiv National Technical University of Agriculture, Issue 202 "Economic Sciences", 198-209.
Noblet, J., Labussière, E., Renaudeau, D., & van Milgen, J. (2022). Energy and energy metabolism in swine. Sustainable swine nutrition, 65-101. https://doi.org/10.1002/9781119583998.ch3
Novgorodska, N., & Verbytskyi, S. (2022). Theoretical basics and technological characteristics of pork with typical syndromes. Ştiinţa Agricolă, (2), 60-65. https://doi.org/10.55505/sa.2022.2.07
Over, C., Prottengeier, B., Magner, R., Zang, S., Schultheiß, U., & Bergschmidt, A. (2023) Tierkörperbeseitigung Rind und Schwein: Erhebungsleitfaden Nationales Tierwohl-Monitoring. Konsortium des Projektes Nationales Tierwohl-Monitoring (NaTiMon), 29 p. https://doi.org/10.3220/MX1681994424000
Palamarchuk, I., Mushtruk, M., Vasyliv, V., Stefan, E., Priss, O., Babych, I., ... & Pushanko, N. (2024). Modelling the centrifugal mixing process of minced meat to optimise the production of chopped meat semi-finished products. Potravinarstvo, 18. https://doi.org/10.5219/1959
Petranović, Z., Cvrtila, Ž., & Mikuš, T. (2021). Utjecaj uzgoja na kvalitetu mesa svinja. MESO: Prvi hrvatski časopis o mesu, 23(2.), 155-160. https://doi.org/10.31727/m.23.2.1
Razmaitė, V., Juška, R., Leikus, R., & Jatkauskienė, V. (2021). Pork quality of two Lithuanian breeds: Effects of breed, gender and feeding regimen. Animals, 11(4), 1103. https://doi.org/10.3390/ani11041103
Salavatulina, R. V. (2005). Rational use of raw materials in sausage production. GIORD, 236 р.
Sergeeva, A. S. (2024). Current issues in determining fat content in food products and food raw materials (review). Measurement Standards. Reference Materials. 20(1), 59-84. https://doi.org/10.20915/2077-1177-2024-20-1-59-84
Senčić, Đ., & Samac, D. (2024). Kvaliteta organskoga svinjskog mesa. MESO: Prvi hrvatski časopis o mesu, 26(1.), 68-73. https://hrcak.srce.hr/314591
Shalushkova, L. P., & Gordynets, S. A. (2021). Rational schemes of meat cutting for retail trade. Actual issues of processing of meat and dairy raw materials, (2), 90-98.
Sini, T. K., Santhosh, S., Joseph, A. C., & Ravisankar, C. N. (2008). Changes in the characteristics of rohu fish (Labeo rohita) sausage during storage at different temperatures. Journal of Food Processing and Preservation, 32(3), 429-442. https://doi.org/10.1111/j.1745-4549.2008.00188.x
Sokolenko, V. V., Vinnikova, L. G., Samilyk, M. M., & Bolgova, N. V. (2021). Regulation of qualitative indicators of fatty tissue before slaughter. Herald of Lviv University of Trade and Economics. Technical Sciences, 26, 78-85. https://doi.org/10.36477/2522-1221-2021-26-11
Sychevskyi, M., Voitsekhivska, L., Kopylova, K., Verbytskyi, S., & Okhrimenko, Y. (2021). Criterial features of the structural characteristics of fine-textured poultry meat. Food Science & Technology, (2073-8684), 15(1). https://doi.org/10.15673/fst.v15i1.1965
Tayeva, A., Kozhakhiyeva, M., Jetpisbayeva, B., Tlevlessova, D., Samadun, A., & Valiyv, A. (2023). Development of technology of boiled sausage from non-traditional raw materials. Eastern-European Journal of Enterprise Technologies, 122(11). https://doi.org/10.15587/1729-4061.2023.277494
Technological instructions for deboning and desinewing meat. (1998). Kyiv: National Association of Meat and Meat Products Producers of Ukraine "Ukrmyaso", 21 p.
Teixeira, A., & Rodrigues, S. (2021). Consumer perceptions towards healthier meat products. Current opinion in food science, 38, 147-154. https://doi.org/10.1016/j.cofs.2020.12.004
Toldrá, F. (2006). Meat: chemistry and biochemistry. Handbook of Food Science, Technology and Engineering, Y. Hui, Ed., CRC Press, Taylor & Francis Group, Boca Raton, FL, USA.
Toldrá, F., & Reig, M. (2014). The biochemistry of meat and fat. Handbook of fermented meat and poultry, 47-54. http://dx.doi.org/10.1002/9781118522653
Wood, J. D. Chapter 20 – Meat Composition and Nutritional Value. In Lawrie´s Meat Science (EighthEdition) (ed. Toldra´, F.), 635–659 (Woodhead Publishing, 2017). https://doi.org/10.1016/B978-0-08-100694-8.00020-0.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Downloads
Download data is not yet available.
