Abstract
This paper presents the opportunity to promote the Colombian industry towards the development of new high performance materials manufactured by powder metallurgy
(PM) as an alternative to the conventional manufacturing processes, generating new needs for the national industry. The objective of this work is describe the manufacturing
processes of composite materials, type CERMET, formed by a CERAMIC phase, which is tungsten carbide (WC), and a METAL phase which is cobalt (Co). Additionally, analyze
at microstructural level the manufactured materials using vacuum sintering process. The designed alloy was a mixture of 88% WC and 12% Co according to ISO K40 standard. The process involved the control of precursor materials, found in powder form, followed by mixing and milling steps, and finally compaction and sintering. The microstructures and chemical compositions obtained by scanning electron microscopy (SEM-EDS) were studied in
order to evaluate the mechanical behavior of the CerMet;for that, microhardness tests were performed reaching values of 1289HV0.5, which are related with the low porosity levels such as A02, B00, C00, and average grain size of 1.14 μm. These results indicate that is possible to manufacture wear resistance high performance materials in the country. It highlights the relevance of enhancing the synergy between government entities such as SENAColciencias -Universidad Nacional to create applied research in the country.
References
Chang, S., & Chang, P. (2014). Investigation into the sintered behavior and properties of nanostructured WC–Co–Ni–Fe hard metal alloys. Materials Science And Engineering: A, 606, 150-156. doi: https://doi.org/10.1016/j.msea.2014.03.096
Gant, A., Gee, M., Gohil, D., Jones, H., & Orkney, L.(2013). Use of FIB/SEM to assess the tribocorrosion of WC/Co hardmetals in model single point abrasion experiments. Tribology International, 68, 56-66. doi: https://doi.org/10.1016/j.triboint.2012.11.008
Gille, G., Szesny, B., Dreyer, K., van den Berg, H., Schmidt, J., Gestrich, T., & Leitner, G. (2002). Submicron and ultrafine grained hardmetals for microdrills and metal cutting inserts. International Journal Of Refractory Metals And Hard Materials, 20(1), 3-22. doi: https://doi.org/10.1016/S0263-4368(01)00066-X
Hillskog, T. (2003). Powder metallurgy tool steels. Metalforming Magazine, 48-51. Recuperado de http://www.bucanada.ca/media/pm_tool_steels_metalformingmagazine03.pdf
International standard ISO 513. (2004). Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application. Third edition.
Katiyar P., Singh P., Singh R. & Kumar I. (2016). Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts. International Journal of Refractory Metals and Hard Materials, 54, 27-38. doi: https://doi.org/10.1016/j.ijrmhm.2015.06.018
Metal Powder Industries Federation, (2016). Powder Metallurgy—Intrinsically Sustainable. Recuperado de: http://www.mpif.org/IntroPM/PDFs/PM-Intrinsically-Sustainable.pdf
Randall, M. (1989). Particle Packing Characteristics. Metal Powder Industries Federation.
Sandvik. (2016) Understanding Cemented Carbide. Recuperado de: http://www.hyperion.sandvik.com/en/products/cementedcarbide/oil-and-gas/other-products/fishing-milling-tools/h11n-cementedcarbide
Shibata, J., Murayama, N., & Niinae, M. (2014). Recovery of tungsten and cobalt from tungsten carbide tool waste by hydrometallurgical method. Geosystem Engineering, 17(2), 120-124. doi: https://doi.org/10.1080/12269328.2014.929983
Upadhyaya A., Sarathy D. & Wagner G. (2001). Advances in sintering of hard metals.Materials and Design, 22, 499-506.doi: https://doi.org/10.1016/S0261-3069(01)00005-X
Villar, C. (2009). Pulvimetalurgia: En busca de nuevos materiales. Metal actual, 14, 4-9

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2019 Servicio Nacional de Aprendizaje (SENA)















