Como Citar
Perea Salcedo, D. L. (2013). Failure analysis of clutch disc in a two-ton truck. Informador Técnico, 77(1), 22. https://doi.org/10.23850/22565035.41
Resumo
This article presents the failure analysis of a clutch disc in a two-ton truck. The failure part was made of high-carbon steel for springs. Although the failure surface was very thin and difficult to interpret, the fracture surface examination revealed chevron marks and the presence of faint beach marks. The failure parts were made of hardened 1070 carbon steel. The cushioning plate experienced shear and bending alternating stress. The end failure is caused by shock load.
Referências
Avner, S. H. Introducción a la metalurgia física. 2 ed. México: Calypso S.A. 1987.
ASM INTERNATIONAL. ASM HANDBOOK . Metallography And Microstructures. ASM INTERNATIONAL. Vol. 9. 1992.
ASM INTERNATIONAL. ASM HANDBOOK - Materials Characterization. ASM INTERNATIONAL. VOL. 10. 1992a.
EXEDY. DAIKIN CLUTCH FUNDAMENTALS AND PRODUCT GUIDE . 2010 [en linea ] http://es.scribd.com/doc/34121089/Clutch-Fundamentals.2010 [Recuperado el 25 de 11 de 2012].
GCLUNAVIC. ANÁLISIS DE PRESTACIONES EN AUTOMÓVILES. 2011. [en linea] http://es.scribd.com/doc/51218246/20/EL-CICLO-SAE-J-227. [Recuperado el 25 de 11 de 2012].
Koocharoenprasit, S. B. (2011). Design and Analysis of Clutch Housing Prototype for One Cylinder Diesel Engine Direct Clutch System. The Second TSME International Conference on Mechanical Engineering, 2011. p.19-21.
MOLLER, R. Transporte urbano y desarrollo sostenible en América Latina. 2006. [en linea] http://books.google.com.co/books?id=8omWC2prdgEC&pg=PA129&lpg=PA129&dq=Velocidad+promedio+de+un+vehiculo+en+cali&source=bl&ots=PQujxmkvLf&sig=KuN7Tn-a5Qj_KbNhLKDYgOHxqIM&hl=es-419&sa=X&ei=Skq2UMzjL8OJywGixYGICQ&ved=0CCkQ6AEwAA#v=onepage&q=Velocidad%20pro [Recuperado el 28 de 11 de 2012].
SHIGLEY, J., & MITCHEL, l. L. DISEÑO EN INGENIERÍA MECÁNICA. 3 ed. 1983
Downloads
Não há dados estatísticos.
