Abstract
The aim of this paper is introduce the reader to the area of multilayer coatings, which appear as an effective solution to the inherent problem of wear onseveral tools or devices. Initially we review where it shows the reasons why hard coatings have become indispensable in most industrial sectors. Below ismentioned a little about obtaining multilayer system and its benefits in termsof increasing its mechanical properties, to finally show two cases of actual application of such coatings and the results obtained.References
Bejarano, G.; Caicedo, J. M.; Prieto, P.; Balogh, A. G. and Enders, S. En: Thin Solid Films. 494 (2005); p. 53–57
https://doi.org/10.1016/j.tsf.2005.08.192
Bejarano, J. G.; Caicedo, J. C.; ADAM; BALOGH, G. and GOTTSCHALK, S. En: Phys. stat. sol. (c) 4, No. 11 (2007); p. 4260–4266
Braic, M. et al. Plasma deposition of alternate TiN/ZrN multilayer hard boatings. En: Journal of Optoelectronics and Advanced Materials Vol. 5, No. 5 (2003); p. 1399-1404
Braic, M., Braic, V., Balaceanu, M., Pavelescu, G. and Vladescu, A. Plasma Deposition of Alternate TiN/ZrN Multilayer Hard Coatings. En: Journal of Optoelectronics and Advanced Materials. Vol. 5 (2003); p. 1399 – 1404
Carvalho, N. J. et al. En: Thin Solid Films. 429 (2003); p. 179-189
https://doi.org/10.1016/S0040-6090(03)00067-1
Dimitrova, V. et al. En: Surface and Coatings Technology. 123 (2000); p. 12-16
https://doi.org/10.1016/S0257-8972(99)00291-1
Guo, Y. B. and Janowski, G. M. Microstructural characterization of white layers formed during hard turning and grinding. En: Transactions of NAMRI/SME. Vol. 32 (2004); p. 367-374
Hans, J. En: Geschichte Altamerikas. Vol. 9 (1998); p. 39-40
Holleck, H. Material selection for hard coatings. En: J. Vac. Sci.Technol. Vol. 4 (1986) p. 2661-266.
https://doi.org/10.1116/1.573700
Holmberg, K. and Matthews, A. Properties, Mechanisms, Techniques and Applications in Surface Engineering (Tribology and Interface Engineering). Coatings Tribology, Vol. 56, Second Edition. Elsevier Science, 2009
Musil, J. Hard and superhard nanocomposite coatings. En: Surf. Coat. Technol. Vol.125 (2000); p. 322-327
Oxley, P. L. B. The Mechanics of Machining: An Analytical Approach to Assessing Machinability. Chichester, England: Ellis Horwood, 1989
Raymond, K. Ceramics ease up the machining of high - hardness parts. En: American Machinist. Vol. 140 (1996); p. 36-39
Rinker, U. and Steinfurt, C. En: European Production Engineering. Vol. 20 (1996); p. 12-14
SUBRAMANIAN, C.; STRAFFORD, K.; WILKS, T.; WARD, L. and MATER. En: J. Proc. Technol. vol. 56 (1996); p. 385














