Abstract
Ti-Si-N coatings were deposited by DC reactive magnetron sputtering on stainless steel AISI 304 substrates varying the N2 flow, in order to study the effect on the structural, mechanical and tribological properties. The coatings were deposited using a 99.999 % purity Ti-Si (90- 10 at. %) target. Structural characterization was performed by X-ray diffraction (XRD), observing peaks corresponding to crystalline TiN. As there is no evidence of the formation of the Ti-Si-N , Ti-Si, Ti or Si free phases, it was determined that the compound consists of TiN crystal grains in an amorphous matrix of SiN. This result is supported by FTIR and EDS analysis. The mechanical properties were studied by nanoindentation, obtaining hardness values of approximately 23 GPa when low N2 flows were used.
References
García-González, L.; Morales-Hernández, J.; Espinoza-Beltrán, F.J.; Mu-oz-Salda-a, J.; Scholz, T.; Schneider, G.A. (2006). Thermal stability, structure and mechanical properties of TiSiN coatings prepared by reactive DC magnetron co-sputtering. Materials Science Forum 509, 93-98.
https://doi.org/10.4028/www.scientific.net/MSF.509.93
Gómez, M.A. (2005). Caracterización de las propiedades tribológicas de los recubrimientos duros. Memoria doctoral. Barcelona: Universidad de Barcelona. Departamento de física aplicada y óptica, pp. 14, 31-46, 51, 56-58, 201-204.
Holmberg, K.; Matthews, A. (2009). Coatings Tribology: Properties, mechanisms, techniques and applications in Surface Engineering. Elsevier pp. 47-48, 103-104, 337-339, 320-336.
Jiang, N; Shen, Y.G; Mai, Y.-W; Chan, T; Tung S.C. (2004). Nanocomposite Ti–Si–N films deposited by reactive unbalanced magnetron sputtering at room temperature. Materials Science and Engineering B106, 163–171.
https://doi.org/10.1016/j.mseb.2003.09.033
Kauffmann, F; Dehm, G; Schier, V; Schattke, A; Beck, T; Lang, S; Arzt, E. (2005). Microstructural size effects on the hardness of nanocrystalline TiN/amorphous-SiNx coatings prepared by magnetron sputtering. Thin Solid Films 473: 114–122.
https://doi.org/10.1016/j.tsf.2004.08.080
Kim, G.S; Lee, S.Y; Hahn, J.H; Lee, B.Y; Han, J.G; Lee, J.H; Lee, S.Y. (2003). Effects of the thickness of Ti buffer layer on the mechanical properties of TiN coatings. Surface and Coatings. Technology 171, 83–90.
https://doi.org/10.1016/S0257-8972(03)00243-3
Liu, X.; Ren, Y.; Tan, X.; Sun, S.; Westkaemper, E. (2011). The structure of Ti–Si–N superhard nanocomposite coatings: ab initio study. Thin Solid Films 520, 876-880.
https://doi.org/10.1016/j.tsf.2011.08.003
Llano, Bibiana; Marín, Juan Miguel; Restrepo, Gloria; Ríos Luis Alberto. (2007). Síntesis, caracterización y evaluación fotocatalítica de óxidos mixtos titanio-silicio. Scientia et Technica A-o XIII, (36): 319-324.
Mawhinney, D; Glass, Jr., John A.; And. Yates, John T Jr. (1997). Ftir Study of the Oxidation of Porous Silicon. J. Phys. Chem. B 10: 1202-1206.
https://doi.org/10.1021/jp963322r
Mazaj, M; Stevens, W; Zabukovec Logar, N; Ristic A; Novak Tušar, N; Arcon, I; Daneu, N; Meynen, V; Cool, P; Vansant, E; Kaucic, V. (2009). Synthesis and structural investigations on aluminium-free Ti-Beta/SBA-15 composite. Microporous and Mesoporous. Materials 117, 458–465.
https://doi.org/10.1016/j.micromeso.2008.07.025
Míngolo, N. y Ortiz, M. (2001). Caracterización de recubrimientos y superficies por difracción de rayos X. Procesamiento de materiales por plasma. Curso latinoamericano 4, 251-259.
Oliver, W.C; Pharr, G.M. (2004). Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of Materials Research 19 (1), 3-12.
https://doi.org/10.1557/jmr.2004.19.1.3
Ordu-a Díaz, A; Trevi-o Palacios, C.G; Rojas López, M; Delgado Macuil, R; Gayou, V.L; Torres Jacome, A. (2010). Ftir and electrical characterization of a-Si:H layers deposited by PECVD at different boron ratios. Materials Science and Engineering B 174, 93–96.
https://doi.org/10.1016/j.mseb.2010.04.029
Pierson, H.0. (1996). Handbook of refractory carbides and nitrides: Properties, characteristics, processing and applications. Noyes publications 193, 219-221.
Skoog, D.A; Holler, F.J; Nieman, T.A. (2001). Espectrometría de absorción en el infrarrojo. Principios de análisis instrumental, pp. 411.
Tung, S.C; Yiang, N; Shen, Y.G; Li, L; Mai, Y-W; Chan, T. (2004). Tribological characteristics of tisin films deposited by unbalanced magnetron sputtering. Transient process in tribology Elsevier B.V, pp. 673-687.
Vaz, F; Rebouta, L; Goudeau, Ph; Girardeau, T; Pacaud, J; Rivie´Re, J.P; Traverse, A. (2001). Structural transitions in hard Si-based TiN coatings: the effect of bias voltage and temperature. Surface and Coatings Technology 146 –147, 274–279.
https://doi.org/10.1016/S0257-8972(01)01395-0
Xu, Y; Li, L; Cai, X; Chu, P.K. (2007). Hard nanocomposite Ti–Si–N films prepared by DC reactive magnetron sputtering using Ti–Si mosaic target. Surface and Coatings Technology 201, 6824–6827.
https://doi.org/10.1016/j.surfcoat.2006.09.078
Zhang, X. (2003). Structure and mechanical properties of Ti-Si-N coatings. Tesis maestria de ciencias en ingeniería mecánica. Louisiana, USA: Louisiana State University and Agricultural and Mechanical College. The Department of Mechanical Engineering














