Abstract
The design of mixtures for the development of new products, is one of the areas that has been gaining interest among food producers, given that you can do combinations of products looking for new functional characteristics and optimize the use of raw materials. This paper illustrates the design and optimization of dairy food using mango and yogurt, through sensory evaluation and experimental design of mixtures. We evaluated the necessary Sanitary and Hygienic conditions for the elaboration of new products and the implementation of a process for reduction of fruit particle size by sieving the pulp. There was a design of mixtures using mango, sugar cane as a sweetener and yogurt as a vehicle. We evaluated the physicochemical properties of the fruit at its optimal state of maturity and formulated mixtures for yogurt, fruit, valuing the effect of the components in the final formulations respect to acidity, pH, chromatically properties and sensory attributes. Best properties observed were with 15 g of sugar, 20 g of puree and 65 g of yogurt. Optimum pH were 3,97; total acidity of 98,8 meq kg-1 and soluble solids between 17,0 and 19,6 as maximum. The contribution lies in the valuation of the methodology of the designs for ternary mixtures that can be through sensory or physicochemical analysis.
Para citar este artículo
Salamanca, S., Reyes, L., Osorio, M. y Rodríguez, N. (2015). Diseño experimental de mezclas como herramienta para la optimización de cremolácteos de mango. Rev. Colomb. Investig. Agroindustriales, 2(1), 16-24. DOI: http://dx.doi.org/10.23850/24220582.166
References
Álvarez, L. R. (2006). Superficies de respuesta en la optimización de procesos de interés agroalimentario.
Propiedades Fisicoquímicas y sistemas de procesado:Productos hortofrutícolas en el desarrollo agroalimentario.
Universidad del Tolima. CCI. Investigaciones.
AOAC International. (1999). Official Methods of Analysis (16th ed.). USA: Maryland.
Bouffier, A., Arnold, J. & Schuttler, B. (2014). A minealternative to D-Optimal Desing for the linear model. PLOS ONE, 10,1-13.
Braco, I. G. & Gasparetto, C. A. (2003). Aplicação dametodologia de superfície de resposta para o estudo do efeito da temperatura sobre o comportamento reológico de misturas ternárias de polpa de manga e sucos de laranja e censura. Ciência e Tecnologia de Alimentos 23. supl.
Cornell, J. A. (1973). Experiments with Mistures: Areview. Technometrics, 15,437-455.
Cornell, J. A. (1983). Experiments with Mixtures: Design,Models and the Analysis of Mixture. New York: John Wiley.
Cornell, J. A. (1986). A Comparison Between Two Ten-Point Designs for Studing Three Components Mixtures System. Journal of Quality Technology, 18,1-15.
Depypere, F., Verbeken, D., Thas, O. & Dewettinck, K. (2003). Mixture design approach on the dynamic rheological and uniaxial compression behaviour of milk desserts. Food Hydrocolloids, 17(3), 311-320.
Henika, R. G. y Palmer, G. M. (1976). Response Surface Methodology: Revisited. Cereal Food Science, (21),432-445.
Huor, S. S., Murphy, E. M., Reed, C. y Cornell, J. A.(1981). Formulation and Sensorial Evaluations of a Fruit Punch Containing Watermelon Citrullus lanatus Juice. Journal of Food Science. 45, 809-813.
Jhonson, T. M. & Zabik, M. E. (1981). Response Surface Methodology for Analysis of Protein Interaction in Angel
Food Cakes. Journal of Food Science. 46,1226-1230.
Kpodo, F. M., Afoakwa, E. O., Amoa, B. B., Saalia, F. K. & Budu, A. S. (2013). Application of multiple component constraint mixture desing for studying the effect of ingredient variation s on the chemical composition and physicol-chemical properties of soy-penaut-cowmilk. International Food Research Journal, 20(2),811-818.
Kumar, S. B., Ravi, R. & Saraswathi, G. (2010). Optimization of fruit punch using mixture design. Journal of Food Science. 75, 1. S1-S7.
Khuri, A. & Cornell, J. A. (1987). Response Surfaces: Design and Analysis. New York: Marcel Dekker. Inc.
Mali, S., Debiagi, F., Grossmann, M. V., & Yamashita,F. (2010). Starch, sugarcane bagasse fibre, and polyvinyl
alcohol effects on extruded foam properties: A mixture design approach. Industrial Crops and Products, 32(3),353-359.
Mathews, P. (2005). Desing of experiments with Minitab.ASQ Quality Press. Milwaukee, Wisconsin. USA.American Society for Quality, Quality Press.
Nikzade, V., Tehrani, M. M., Saadatmand-Tarzjan,M. (2012). (Optimization of low-cholesterol–low-fat mayonnaise formulation: Effect of using soy milk and some stabilizer by a mixture design approach). Food Hydrocolloids, 28(2), 344-352.
Salamanca, G. G., Forero, L. F., García, J. (2007). Algunas investigaciones relevantes sobre mango. Memorias IX Congreso Venezolano de Fruticultura. Universidad Centroccidental “Lisandro Alvarado”. Barquisimeto,Estado Lara.
Snee, R. D. (1971). (Design and Analysis of Mixtures Experiments). Journal of Quality Technology. 3,159-169.
Thompson, W. O. y Miers R. H. (1968). Response Surface for Experiments with Mixtures. Technometrics,10, 739-755.
Waldrop, M., Ross, C. (2014). (Sweetener blend optimization by using mixture desing methodology and the electronic nose). Journal of Food Science. 79S1,782-S1794.